High Temperature PET Tape for PCB Manufacturing, Heat Resistant Silicone Adhesive for Soldering Masking and 3D Printer Bed
Source:
|
Author:Koko Chan
|
Published time: 2026-07-29
|
11 Views
|
🔊 Click to read aloud
❚❚
▶
|
Share:
Meta Description: Heat resistant silicone PET tape withstands 180–200°C, residue-free masking for PCB wave soldering, reflow oven; reusable coating for FDM 3D printer build plate.
PCB manufacturing and 3D printing both require reliable heat-resistant masking material that can survive repeated high-temperature cycles without leaving adhesive residue. Our high-temperature polyester PET tape coated with medical-grade silicone adhesive serves dual purposes for electronics production and additive manufacturing lines.
The thin yet tough PET substrate supports short-term peak temperature up to 200°C and continuous working temperature of 180°C. The inert silicone adhesive maintains tight coverage during wave soldering, reflow soldering and hot plate heating; after cooling, it peels off completely without polluting PCB gold fingers, copper traces or 3D printed PLA/ABS parts. Transparent film design allows operators to inspect circuit layout and print bottom layers without removing the tape.
Core Functional Benefits
.png)
Zero Residue on Circuit Boards: Silicone adhesive will not corrode gold plating, protecting PCB conductivity and appearance post-soldering.
Multiple Reuse for 3D Printing: The smooth PET surface prevents plastic filament warping and sticking, reusable 15–20 printing cycles before replacement.
Excellent Dielectric Insulation: 4kV breakdown voltage provides temporary insulation for exposed electronic components during thermal processing.
Chemical Inertness: Resists flux solvent, cleaning alcohol and printing resin erosion.
RoHS & Halogen Free: Compliant with global electronics environmental standards for export PCB factories.
Main Production Applications
1. PCB & FPC Electronics Manufacturing
Gold finger masking during wave soldering, dip tin and reflow oven process
Flexible circuit board temporary fixing during hot pressing
SMT jig surface anti-stick protective film
2. FDM 3D Printing Industry
.png)
Build plate coating to prevent PLA, PETG, ABS filament adhesion & warping
Masking model support structures before high-temperature post-curing
Electronics manufacturers often struggle with residual glue causing short circuits and poor soldering points. Our silicone PET high-temperature tape solves this pain point while cutting daily consumable cost for 3D printing workshops via repeated use. Custom die-cut PCB masking sheets and standard jumbo rolls are both available with fast lead time.
.png)
